Mobile LITHIUM Battery Charger


This is a battery charger that plugs into an accessory power socket in a car, truck, rover, or boat, to charge 12 volt Lithium Ferrous Phosphate batteries made by Bioenno Power and others.  The 10-13 volt car’s system is converted into 14.6 volts, while limiting the current to 3 amperes.  The voltage and current LED meter brightly displays the battery’s voltage and the charging amperage.   When fully charged, the current reads near zero and the battery’s float voltage is displayed.   There are two output wires, one with a Powerpole ® plug, and a second with a DC barrel power plug.  BOTH wires connect internally to the charger’s output.  Equipment may be powered using the Powerpole plug, while the battery is being charged via the 5.5 mm DC plug.  The charger is housed in a sturdy aluminum case.  The auxiliary power plug is fused.  A red LED lights when  powered.


Input DC voltage:  28 V max.  11 V min for proper charging

Output Voltage: 14.6 volts when not current limited.  (+-1%}

Output Current:  3 amperes Max during bulk charging (+-5%) 

Battery:  Use with any Bioenno 12 volt LiFePO4 battery         

Input wire:  6 feet long with accessory power plug with 5 amp fuse

Output Wires:  1 foot long with a DC barrel male plug, 1 foot long with Powerpoles

Case:  Black painted cast aluminum, white printing, 4.75 x 2.5 x 1.4 inches, 1 lb.

® registered trademark of Anderson